NEC Univerge SV9100 - Page 283

283
Single Line Telephone
All AIC log ins become logged out.
1. Lift the handset.
2. Dial the AIC Log Out service code (Program 11-13-08).
- OR -
1. To log out of a group without using AIC, lift the handset.
2. Dial the Log Out service code 655 (Program 11-13-02).
Multiple Agent Log In:
To Log In:
Multiline Terminal
After already being logged in:
1. Press the LOG IN/LOG OUT key (Program 15-07-01 or SC 852: *10).
2. Dial 0 to cancel the log out option.
3. Dial the Agent Identity Code (AIC) (up to four digits).
 The LOG IN/LOG OUT key lights.
- OR -
Press Speaker and dial the AIC Log In service code (Program 11-13-08).
4. Dial the Agent Identity Code (AIC) (up to four digits).
 The Log In/Log Out key lights.
Single Line Telephone
Follow Steps 1~3 to log in with additional AICs (up to three) anytime.
1. Lift the handset and dial the AIC Log In service code (Program 11-13-08).
2. Dial the log in code (up to 20 digits).
 This step is not required if the ID code is disabled in Program 41-01-02.
3. Dial the first Agent Identity Code (AIC) (up to four digits).
 You hear a confirmation tone when immediately logging in with additional AICs.
4. For second agent log: Dial the second Agent Identity Code (AIC) (up to four digits).
 You hear a confirmation tone.
5. For third agent log: Dial the third Agent Identity Code (AIC) (up to four digits).
 You hear a confirmation tone.