NEC Univerge SV9100 - Page 291

291
Program
Number
Program Name/Description
Input Data
Default
10-03-06
ETU Setup (DLCA PKG Setup) – Terminal
Type (B2)
Setup and confirm the Basic Configuration data
for terminal type.
0 = Not set
6 = PGD(2)-U10 ADP (Paging)
7 = PGD(2)-U10 ADP (Tone
Ringer)
8 = PGD(2)-U10 ADP (Door
Box)
9 = PGD(2)-U10 ADP (ACI)
12 = APR (B2 Mode)
0
10-03-07
ETU Setup (DLCA PKG Setup) – Logical Port
Number (B2)
Use to setup and confirm the Basic
Configuration data for logical port number (B2).
0 = Not Set
6 = PGD(2)-U10 ADP (Ext.
Speaker)
7 = PGD(2)-U10 ADP (Paging/
Tone Ringer = 1 ~ 8)
8 = PGD(2)-U10 ADP (for Door
Box = 1 ~ 8) (ACI) = (1 ~ 96)
9 = PGD(2)-U10 ADP
12 = APR (for B2 Mode) (193 ~
960)
0
10-03-08
ETU Setup (DLCA PKG Setup) – Multiline
Telephone Type
Read only program that shows the type of
multiline terminal connected to the port.
0 = DT3
**
1 = Dterm8
2 = Dterm7
0
10-03-09
ETU Setup (DLCA PKG Setup) – Side Option
Information
Read only command that shows the type of
side module connected to the terminal.
0 = No Option
1 = 8LK Unit
2 = 16LK Unit
3 = 24ADM
0
10-03-10
ETU Setup (DLCA PKG Setup) – Bottom
Option Information (Only applies to DTL
style telephones)
Shows optional adapter information.
0 = No option
1 = APR
2 = ADA
3 = BHA
0
10-03-11
ETU Setup (DLCA PKG Setup) – Handset
Option Information
Shows optional adapter information.
0 = No option
1 = PSA/PSD
2 = Bluetooth Cordless Handset
0
11-11-16
Service Code Setup (for Setup/Entry
Operation) – Enable Force Ringing of
Incoming Intercom Calls
Allows a telephone to be manually set to ring
when called if the system is set to voice
announce in Program 20-02-12.
MLT, SLT
0 ~ 9,
*
, # Maximum of eight
digits
775
20-07-01
Class of Service Options (Administrator
Level) – Manual Night Service Enabled
Turn Off or On an extension for manually
Switching the Night Mode (Service Code 718).
This option must be enabled for an extension to
be able to display the Night indication.
0 = Off
1 = On
COS 1 ~ 14 = 0
COS 15 = 1