EasyManua.ls Logo

NEC Univerge SV9100 - Page 299

NEC Univerge SV9100
1402 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
299
Program
Number
Program Name/Description
Input Data
Default
20-11-16
Class of Service Options (Hold/Transfer
Service) Call Redirect
Turn Off or On an extension user ability to
transfer a call to a predefined destination (such
as an operator, voice mail, or another
extension) without answering the call.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-11-17
Class of Service Options (Hold/Transfer
Service) Department Group Trunk-to-
Trunk Transfer (Each Telephone Group
Transfer)
Turn Off or On an extension user in a
Department Group ability to use the
Trunk-to-Trunk Forwarding service codes.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-11-18
Class of Service Options (Hold/Transfer
Service) No Recall
Allow (0)/Deny (1) answered Transferred calls
from recalling the originating extension.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-11-19
Class of Service Options (Hold/Transfer
Service) Hold/Extended Park
Determine whether an extension Class of
Service should allow normal (0) or extended
Park (1).
0 = Off
1 = On
COS 1 ~ 15 = 0
20-11-20
Class of Service Options (Hold/Transfer
Service) No Callback
Turn Off or On an extension ability to receive
Callbacks.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-11-21
Class of Service Options (Hold/Transfer
Service) Restriction for Tandem Trunking
on Hang Up
Allow/Deny an extension user ability to set up a
tandem/conference call automatically when
they hang up.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-11-22
Class of Service Options (Hold/Transfer
Service) Restricted Unsupervised
Conference
Allow/Deny an extension user ability to initiate a
Trunk-to-Trunk Transfer (Tandem Trunking).
0 = Off
1 = On
COS 1 ~ 15 = 0
20-11-23
Class of Service Options (Hold/Transfer
Service) CAR/VE Call Forward Set/Cancel
Turn Off or On an extension user ability to set
and cancel Call Forwarding for a CAR or Virtual
Extension.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-11-24
Class of Service Options (Hold/Transfer
Service) Trunk Park Hold Mode
Set the hold type when a trunk call is put on
hold by an extension.
0 = Non Exclusive Hold (Off)
1 = Exclusive Hold (On)
COS 1 ~ 15 = 1

Table of Contents

Other manuals for NEC Univerge SV9100

Related product manuals