NEC Univerge SV9100 - Page 308

308
Guide to Feature Programming
 The items highlighted in gray are read only and cannot be changed.
Program
Number
Program Name/Description
Input Data
Default
10-03-01
ETU Setup (DLCA PKG Setup) – Terminal
Type (B1)
Setup and confirm the Basic Configuration data
for terminal type (B1).
0 = Not set
1 = Multiline Terminal
3 = Bluetooth Cordless Handset
6 = PGD (Paging)
7 = PGD (Tone Ringer)
8 = PGD (Doorbox)
9 = PGD (ACI)
10 = DSS Console
11 = -- Not Used --
0
10-03-02
ETU Setup (DLCA PKG Setup) – Logical Port
Number (B1)
Use to setup and confirm the Basic
Configuration data for logical port number (B1).
0 = Not set
1 = Multiline Terminal (1 ~ 960
6 = PGD(2)-U10 ADP (Paging)
(1 ~ 8)
7 = PGD(2)-U10 ADP (for Tone
Ringer) (1 ~ 8)
8 = PGD(2)-U10 ADP (for Door
Box) (1 ~ 8)
9 = PGD(2)-U10 ADP (for ACI)
(1 ~ 96)
10 = DSS (1 ~ 32)
11 = -- Not Used --
0
10-03-05
ETU Setup (DLCA PKG Setup) – Optional
Installed Unit 2
Use to setup and confirm the Basic
Configuration data for optional installed Unit 2.
0 = None
1 = APR Module
2 = APA Module
3 = ADA Module
4 = CTA/CTU Module
0
10-03-06
ETU Setup (DLCA PKG Setup) – Terminal
Type (B2)
Setup and confirm the Basic Configuration data
for terminal type.
0 = Not set
6 = PGD(2)-U10 ADP (Paging)
7 = PGD(2)-U10 ADP (Tone
Ringer)
8 = PGD(2)-U10 ADP (Door
Box)
9 = PGD(2)-U10 ADP (ACI)
12 = APR (B2 Mode)
0
10-03-07
ETU Setup (DLCA PKG Setup) – Logical Port
Number (B2)
Use to setup and confirm the Basic
Configuration data for logical port number (B2).
0 = Not Set
6 = PGD(2)-U10 ADP (Ext.
Speaker)
7 = PGD(2)-U10 ADP (Paging/
Tone Ringer = 1 ~ 8)
8 = PGD(2)-U10 ADP (for Door
Box = 1 ~ 8) (ACI) = (1 ~ 96)
9 = PGD(2)-U10 ADP
12 = APR (for B2 Mode) (193 ~
960)
0