NEC Univerge SV9100 - Page 311

311
Program
Number
Program Name/Description
Input Data
Default
20-07-25
Class of Service Options (Administrator
Level) – Set/Cancel Caller ID Refuse
Enable/Disable an extension user ability to set
or cancel Caller ID Refuse.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-07-26
Class of Service Options (Administrator
Level) – Dial-In Mode Switch
Enable/Disable an extension user ability to set
or cancel dial-in mode switch.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-07-27
Class of Service Options (Administrator
Level) – Do-Not-Call Administrator
Enable/Disable an extension user ability to set
or cancel do not call administrator.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-08-01
Class of Service Options (Outgoing Call
Service) – Intercom Calls
Turn Off or On Intercom calling for the
extension.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-08-02
Class of Service Options (Outgoing Call
Service) – Trunk Outgoing Calls
Turn Off or On outgoing trunk calling for the
extension.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-08-03
Class of Service Options (Outgoing Call
Service) – System Speed Dialing
Turn Off or On an extension user ability to make
outbound calls using system speed dial
numbers.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-08-04
Class of Service Options (Outgoing Call
Service) – Group Speed Dialing
Turn Off or On an extension user ability to make
outbound calls using group speed dial
numbers.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-08-06
Class of Service Options (Outgoing Call
Service) – Toll Restriction Override
Turn Off or On Toll Restricting Override
(Service Code 663).
0 = Off
1 = On
COS 1 ~ 15 = 0
20-08-08
Class of Service Options (Outgoing Call
Service) – Toll Restriction Dial Block
Turn Off or On an extension ability to use Dial
Block.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-08-10
Class of Service Options (Outgoing Call
Service) – Signal/Voice Call
Turn Off or On an extension allowing it to force
Handsfree Answerback or Forced Intercom
Ringing for outgoing Intercom calls.
0 = Off
1 = On
COS 1 ~ 15 = 1