NEC Univerge SV9100 - Page 336

336
Program
Number
Program Name/Description
Input Data
Default
16-03-01
Secondary Department Group
Assign extensions to multiple Department
Groups and set the priority assignment. Each
Secondary Department Group can have up to
16 extensions assigned.
Extension Number
Maximum of eight digits
Priority Order
0 ~ 9999
No Setting
16-04
Call Restriction Between Department
Groups
Calls between members of different
Department (Station) groups can be restricted
per group.
0 ~ 64
0
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-09-07
Class of Service Options (Incoming Call
Service) – Call Queuing
Turn Off or On an extension user ability to have
calls queued if a call rings the extension when it
is busy.
Program 20-13-06 must be set to 0 (Off) for
this feature to work.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-11-17
Class of Service Options (Hold/Transfer
Service) – Department Group Trunk-to-
Trunk Transfer (Each Telephone Group
Transfer)
Turn Off or On an extension user in a
Department Group ability to use the
Trunk-to-Trunk Forwarding service codes.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-06
Class of Service Options (Supplementary
Service) – Automatic Off-Hook Signaling
(Automatic Override)
Allow a busy extension user to Manually (0) or
Automatically (1) receive off-hook signals.
This setting is to receive incoming call
signaling information during call queuing.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-14
Class of Service Options (Supplementary
Service) – Department Calling (PLT No
Called Extension)
Turn Off or On an extension user ability to call a
Department Group Pilot.
0 = Off
1 = On
COS 1 ~ 15 = 1