NEC Univerge SV9100 - Page 367

367
Program
Number
Program Name/Description
Input Data
Default
22-11-02
DID Translation Number Conversion –
Target Number
For each DID Translation Table entry
(1 ~ 4000), specify the extension the system
dials after translation.
Maximum of eight digits
No Setting
22-11-03
DID Translation Number Conversion – DID
Name
For each DID Translation Table entry
(1 ~ 4000), specify the name that should show
on the dialed extension display when it rings.
Maximum of 12 digits
No Setting
22-11-04
DID Translation Number Conversion –
Transfer Operation Mode
For each DID Translation Table entry
(1 ~ 4000), specify the condition required to
transfer the call to the destination defined in
Program 22-11-05 and Program 22-11-06.
0 = No Transfer
1 = Busy
2 = No Answer
3 = Both
0
22-11-05
DID Translation Table Number Conversion –
Transfer Destination Number 1
Define the 1st transfer destination for each
tables received number.
0 = No Setting
1 ~ 100 = Incoming Group
101 = (Not Used)
102 = In-Skin/External Voice
Mail or InMail
103 = Centralized VM
201 ~ 264 = Extension Group
400 = Valid Extension Number
401 = DISA
501 ~ 599 = DISA/VRS
Message
1000 ~ 1999 = Speed Dial
Number (000 ~ 999)
0
22-11-06
DID Translation Table Number Conversion –
Transfer Destination Number 2
400 = Allows the outside party to dial a different
extension number in the translation table (for
example, ring no answer to a dialed number,
the caller then hears a dial tone, allowing them
to enter another Valid Extension Number).
401 = Provides the caller with DISA dialing
options (requires using the DISA password).
Note: This applies to 22-11-05 and 22-11-06.
If the Transfer Destinations are busy or receive
no answer, those calls are transferred to the final
transfer destination (Program 22-10).
0 = No Setting
1 ~ 1 00 = Incoming Group
101 = (Not Used)
102 = In-Skin/External Voice
Mail or InMail
103 = Centralized VM
201 ~ 264 = Extension Group
400 = Valid Extension Number
401 = DISA
501 ~ 599 = DISA/VRS
Message
1000 ~ 1999 = Speed Dial
Number (000 ~ 999)
0
22-11-07
DID Translation Number Conversion – Call
Waiting
For each DID Translation Table entry
(1 ~ 4000), specify whether or not Call Waiting
should be allowed.
0 = Disable (No)
1 = Enable (Yes)
0