NEC Univerge SV9100 - Page 372

372
Program
Number
Program Name/Description
Input Data
Default
22-02-01
Incoming Call Trunk Setup – Incoming Type
For each Night Service Mode, enter service
type 8 when the trunk should be a DID (DDI)
Mode Switching trunk.
Incoming Type for Day/Night
Mode (1 ~ 8):
0 = Normal
1 = VRS (second dial tone if no
VRS installed)
2 = DISA
3 = DID
4 = DIL
5 = E&M Tie line
6 = Delayed VRS
7 = ANI/DNIS
8 = DID(DDI) Mode Switching
0
22-11-02
DID Translation Number Conversion –
Target Number
For each DID Translation Table entry
(1 ~ 4000), specify the extension the system
dials after translation.
Do not assign Received Digits in Program
22-11-01 when using DID Call by Time Schedule.
Maximum of 24 digits
No Setting
22-17-01
Dial-In Conversion Table Area Setup for
Time Pattern – Received Dial
Define the received numbers for each Dial-In
Conversion Table (Program 22-17-02, 22-17-03
and 22-17-04).
Maximum of eight digits
No Setting
22-17-02
Dial-In Conversion Table Area Setup for
Time Pattern – Start of Time
Define the Starting Time for each DID
Translation table in Program 22-17-01.
0000 ~ 2359
(Time)
0000
22-17-03
Dial-In Conversion Table Area Setup for
Time Pattern – End of Time
Define the Ending Time for each DID
Translation table in Program 22-17-01.
0000 ~ 2359
(Time)
0000
22-17-04
Dial-In Conversion Table Area Setup for
Time Pattern – Dial-In Conversion Table
Number
Assign each time pattern to a DID Translation
Table Entry in Program 22-11.
0 ~ 4000
0
22-17-05
Dial-In Conversion Table Area Setup for
Time Pattern – Day of Week
Assign day of week for each DID conversion
table.
1-8
1: Sunday
2: Monday
3: Tuesday
4: Wednesday
5: Thursday
6: Friday
7: Saturday
8: Holiday
1: On (1-8)