NEC Univerge SV9100 - Page 40

40
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
11-11-13
Service Code Setup (for Setup/Entry
Operation) – Display Language Selection for
Multiline Terminal
If needed, redefine the service code used to
select the language for display multiline
terminals.
MLT
Maximum of eight digits
0 ~ 9,
*
, #
678
15-02-01
Multiline Telephone Basic Data Setup –
Display Language Selection
Select the language to be displayed on a
multiline terminal display.
0 = Japanese
1 = English
2 = German
3 = French
4 = Italian
5 = Spanish
6 = Dutch
7 = Portuguese
8 = Norwegian
9 = Danish
10 = Swedish
11 = Turkish
12 = Latin American Spanish
13 = Romanian
14 = Polish
1
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to an
extension.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-11-08
Class of Service Options (Hold/Transfer
Service) – Transfer Information Display
Turn Off or On an incoming transfer preanswer
display for an extension.
0 = Off
1 = On
COS 1 ~ 15 = 1
Operation
Operation is automatic if enabled in programming.