NEC Univerge SV9100 - Page 476

476
GCD-4COTA
Related Features
None
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
14-02-14
Analog Trunk Data Setup – Loop Start/
Ground Start
Select Loop start or Ground start for the trunk.
0 = Loop Start (Loop)
1 = Ground Start (Ground)
0
14-02-21
FAX Branch Connection
Set CO for Fax Branch Connection.
If FAX Branch is selected, Program 14-10
Power Failure Telephone Setting is NOT valid.
0 = No
1 = Yes
0
14-05-01
Trunk Group
Assign trunks to trunk groups (1 ~ 100).
Trunk Port 1 ~ 400 =
Priority 1 ~ 400
Default = Trunks
1 ~ 400 assigned
to trunk group 1
with priorities
equal to the
trunk number.
Trunk 1 = Priority
1 Trunk 400 =
Priority 400.