NEC Univerge SV9100 - Page 489

489
Program
Number
Program Name/Description
Input Data
Default
11-11-15
Service Code Setup (for Setup/Entry
Operation) – Enable Handsfree Incoming
Intercom Calls
Customize the enable handsfree incoming
intercom calls used for registration and setup.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
821
11-11-16
Service Code Setup (for Setup/Entry
Operation) – Force Ringing of Incoming
Intercom Calls
Customize the force ringing of incoming
intercom calls used for registration and setup.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
823
11-11-17
Service Code Setup (for Setup/Entry
Operation) – Programmable Function Key
Programming (2-Digit Service Codes)
Set the service code (default 851) to assign
2-digit function codes to the Function keys.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
851
11-11-18
Service Code Setup (for Setup/Entry
Operation) – BGM On/Off
Customize the BGM On/Off used for
registration and setup.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
825
11-11-19
Service Code Setup (for Setup/Entry
Operation) – Key Touch Tone On/Off
Customize the key touch tone Off/On used for
registration and setup.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
824
11-11-20
Service Code Setup (for Setup/Entry
Operation) – Change Incoming CO and ICM
Ring Tones
Customize the change incoming CO and ICM
ring tones used for registration and setup.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
820
11-11-21
Service Code Setup (for Setup/Entry
Operation) – Check Incoming Ring Tones
Check incoming ring tones used for registration
and setup.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
811
11-11-22
Service Code Setup (for Setup/Entry
Operation) – Extension Name Programming
Customize the Extension name programming
used for registration and setup.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
800
11-11-23
Service Code Setup (for Setup/Entry
Operation) – Second Call for DID/DISA/DIL
Customize the second call of DID/DISA/DIL
used for registration and setup.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
779
11-11-24
Service Code Setup (for Setup/Entry
Operation) – Change Station Class of
Service
Allow an extension user to change the COS of
another extension. Must be allowed in Program
20-13-28.
MLT
0 ~ 9,
*
, # Maximum of eight
digits
777