NEC Univerge SV9100 - Page 508

508
Program
Number
Program Name/Description
Input Data
Default
20-31-04
Timer Class Timer Assignment – Intercom
Interdigits Time (Intercom I/D Timer)
When placing Intercom calls, extension users
must dial each digit during this time.
0 ~ 64800 seconds
10
20-31-05
Timer Class Timer Assignment – Trunk
Interdigits Time (Trunk I/D Timer)
The system waits for this time to expire before
placing the call in a talk state (Call Timer starts
after time expires, Voice Over and Barge-In are
not allowed until after time expires).
0 ~ 64800 seconds
5
20-31-06
Timer Class Timer Assignment – Hotline
Time Start Time (Hotline Start)
A Ringdown extension automatically calls its
programmed destination after this time.
0 ~ 64800 seconds
5
20-31-07
Timer Class Timer Assignment – Ring No
Answer Alarm Time
If a trunk rings a multiline telephone longer than
this time, the system changes the ring cadence.
This indicates to the user that the call has been
ringing too long.
0 ~ 64800 seconds
60
20-31-08
Timer Class Timer Assignment – DIL/
Incoming Ring Group No Answer Time
A DIL that rings its programmed destination
longer than this time diverts to the DIL No
Answer Ring Group (set in Program 22-08).
0 ~ 64800 seconds
0
20-31-09
Timer Class Timer Assignment – DID Ring-
No-Answer Time
In systems with DID Ring-No-Answer Intercept,
this time sets the Ring-No-Answer time. This is
the time a DID call rings the destination
extension before rerouting to the intercept ring
group.
0 ~ 64800 seconds
20
20-31-10
Timer Class Timer Assignment – Hold
Recall Time (Non Exclusive Hold)
A call on Hold recalls the extension that placed
it on Hold after this time. This time works with
the Hold Recall Callback Time (Program
24-01-02).
0 ~ 64800 seconds
90
20-31-11
Timer Class Timer Assignment – Hold
Recall CallBack Time (Non Exclusive Hold)
A trunk recalling from Hold or Park rings an
extension for this time. This time works with
Hold Recall Time or Park Hold Time. After this
time, the system invokes the Hold Recall Time
again. Cycling between time Program 24-01-01
and 24-01-02 and Program 24-01-06 and
24-01-07 continues until a user answers the
call.
0 ~ 64800 seconds
30