NEC Univerge SV9100 - Page 567

567
Program
Number
Program Name/Description
Input Data
Default
21-11-01
Extension Ringdown (Hotline) Assignment
Define the Hotline destination number for each
extension number.
Program the ringdown (Hotline) source and
destination (target) number, up to 24 digits (960
Hotline assignments). Include the trunk access
code (usually 9) in front of the number when
dialing outside numbers.
When programming Speed Dial – System
numbers as the destination, the entry should be
#2 + bin number (the service code for Speed
Dialing and the Speed Dial bin number).
0, *, #, Pause, Hook Flash, @
Maximum of 24 digits
(Code to wait for answer
supervision)
No Setting
22-01-01
System Options for Incoming Calls –
Incoming Call Priority
Determine if Intercom calls or trunk calls have
answer priority when both are ringing
simultaneously.
0 = Intercom call priority
1 = Trunk call priority
1
30-05-02
DSS Console Lamp Table – Busy Extension
Define the LED patterns for busy extensions on
the DSS consoles.
0 ~ 7
7 (On)
30-05-03
DSS Console Lamp Table – DND Extension
Define the LED patterns for DND extensions on
the DSS consoles.
0 ~ 7
3 (RW)
30-05-04
DSS Console Lamp Table – Agent Busy
Define the LED patterns for busy agents
function on the DSS consoles.
0 ~ 7
7 (On)
30-05-05
DSS Console Lamp Table – Out of Schedule
(DSS)
Define the LED patterns for out of schedule (/
DSS) on the DSS consoles.
0 ~ 7
0 (Off)
30-05-06
DSS Console Lamp Table – Agent Log Out
(DSS)
Define the LED patterns for agents that are
logged out on the DSS consoles.
0 ~ 7
5 (IL)
30-05-07
DSS Console Lamp Table – Agent Log In
(DSS)
Define the LED patterns for agents that are
logged in the DSS consoles.
0 ~ 7
4 (IR)
30-05-08
DSS Console Lamp Table – Agent
Emergency (DSS)
Define the LED patterns for agents in
emergency on the DSS consoles.
0 ~ 7
6 (IW)
30-05-09
DSS Console Lamp Table – Hotel Status
Code 1 (Hotel DSS)
Define the LED patterns for hotel status code 1
on the DSS consoles.
0 ~ 7
7 (On)