NEC Univerge SV9100 - Page 586

586
Program
Number
Program Name/Description
Input Data
Default
20-13-05
Class of Service Options (Supplementary
Service) – Intercom Off-Hook Signaling
Turn On or Off an extension ability to send
off-hook Signals.
This setting functions with Programs 20-09-07
and 20-13-06 disabled.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-06
Class of Service Options (Supplementary
Service) – Automatic Off-Hook Signaling
(Automatic Override)
Allow a busy extension to Manually (0) or
Automatically (1) receive off-hook signals.
This setting is to receive incoming call
signaling information during call queuing.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-07
Class of Service Options (Supplementary
Service) – Message Waiting
Turn Off or On an extension user ability to leave
Message Waiting.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-13
Class of Service Options (Supplementary
Service) – Continued Dialing (DTMF) Signal
on ICM Call
Turn Off or On an extension user ability to use
Continued Dialing, which allows DTMF signal
sending while talking on extension.
0 = Off
1 = On
COS 1 ~ 15 = 1
20-13-15
Class of Service Options (Supplementary
Service) – Barge-In, Initiate
You should set this option to 1 for voice mail.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-13-16
Class of Service Options (Supplementary
Service) – Barge-In, Receive
Turn Off or On an extension user ability to have
other extensions barge-in on calls.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-13-28
Class of Service Options (Supplementary
Service) – Allow Class of Service to be
Changed
Turn Off or On an extension user ability to
change COS via Service Code 677.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-13-35
Class of Service Options (Supplementary
Service) – Block Camp On
Set this option to 0 for voice mail.
0 = Off
1 = On
COS 1 ~ 15 = 0
22-01-04
System Options for Incoming Calls – DIL No
Answer Recall Time
A DIL that rings its programmed destination
longer than this time diverts to the DIL No
Answer Ring Group (set in Program 22-08).
0 ~ 64800 seconds
0