589
System Options for Transfer – Delayed Call
Forwarding Time
Set the time a transferred call waits at a
forwarded extension before routing to the called
extension mailbox.
Voice Mail Integration Options – Voice Mail
Department Group Number
Assign which Extension (Department) Group
number is used for the voice mail group.
Department Groups:
0 ~ 64
0 = No Voice Mail
Voice Mail Integration Options – Voice Mail
Master Name
Assign the Voice Mail master name.
Maximum of 12 characters.
Voice Mail Integration Options – Park and
Page
Enable/Disable the system ability to process
the Voice Mail Park and Page (*) commands.
You should normally enable this option.
Voice Mail Integration Options – Message
Wait
Enable/Disable the system ability to process
the Voice Mail Message Wait (#) commands.
You should normally enable this option. If
enabled, be sure that the programmed
Message Notification strings do not contain the
code #9 for trunk access. When using an
external voice mail and Centrex transfer, this
option should be disabled or the service code
#3 in Program 11-12-42 must be changed.
Voice Mail Integration Options – Record
Alert Tone Interval Time
Set the time between Voice Mail Conversation
Record alerts.
Voice Mail Integration Options – CCIS
Centralized Voice Mail Number
Assign the pilot number to Centralized Voice
Mail over CCIS link. Assign only in remote
switches.
Dial (maximum of eight digits)
Voice Mail Integration Options – Analog
Voice Mail Protocol Selection
Assign whether fixed codes or codes used in
Program 45-04 are used for analog voice mail
protocol.
Voice Mail Integration Options – Voice Mail
Fax Digit Add Assignment
Assign up to four digits in front of the station
number sent to the SLT port when a call is
forwarded.
To Next Page
Loading...
