NEC Univerge SV9100 - Page 644

644
Program
Number
Program Name/Description
Input Data
Default
47-06-26
Group Mailbox Subscriber Options –
Message Notification Queuing Option
Use this option to enable or disable message
notification queuing. If enabled, message
notification is stored in queue when there is no
active notification destination.
0 = Disabled
1 = Enabled
0
47-20-01
Station Mailbox Message Notification –
Notification
For the selected entry (1-5), use this option to
enable or disable Message Notification. If
enabled, notification will occur when the
mailbox receives a new message according to
the settings for Type, Start Hour, End Hour, and
notification Phone Number. If disabled,
Message Notification will not occur.
There are five separately programmed Message
notification entries for each Subscriber Mailbox.
0 = Disabled
1 = Enabled
0
47-20-02
Station Mailbox Message Notification –
Notification Begin Hour
For the selected entry (1-5), use this option to
set the hour when Message Notification will
start. Notification will occur only for new
messages received between this setting and
the End Hour setting. This entry is in 24-hour
(military time). For example, 08 is 8:00 AM and
20 is 8:00 PM. For 24-hour notification, make
the Start Hour the same as the End Hour.
There are five separately programmed Message
notification entries for each Subscriber Mailbox.
0 ~ 23 (24 Hour Clock)
0
47-20-03
Station Mailbox Message Notification –
Notification End Hour
For the selected entry (1-5), use this option to
set the hour when Message Notification will
stop. Notification will occur only for new
messages received between the Start Hour and
this setting. This entry is in 24-hour (military
time). For example, 08 is 8:00 AM and 20 is
8:00 PM. For 24-hour notification, make the
Start Hour the same as the End Hour.
There are five separately programmed Message
notification entries for each Subscriber Mailbox.
0 ~ 23 (24 Hour Clock)
0
47-20-04
Station Mailbox Message Notification –
Notification Type
For the selected entry (1-5), use this option to
set the Message Notification type. The choices
are Voice and Pager. Choose Voice when the
Phone Number entry is to a regular office,
home, or mobile telephone. Choose Pager
when you want to deliver the notification to a
digital pager.
There are five separately programmed Message
notification entries for each Subscriber Mailbox.
0 = Undefined
1 = Voice
2 = Pager
1