663
InMail SMTP Setup – SMTP Port
Sets the SMTP server port.
InMail SMTP Setup – Encryption
Enable SSL Encryption.
InMail SMTP Setup – Authentication
Enables authentication, when set to 2 (POP3)
refer to Programs 47-19-xx.
InMail SMTP Setup – User Name
Set the user name for SMTP authentication.
Maximum of 48 characters.
InMail SMTP Setup – Password
Set the password for SMTP authentication.
Maximum of 48 characters.
InMail SMTP Setup – E-mail Address
Set the email address for the system. This is
the “from address” for outgoing emails.
Maximum of 48 characters.
InMail SMTP Setup – Reply to Address
Set the email address for replies to outgoing
emails. This email account is not monitored by
the system and must be checked manually.
Maximum of 48 characters.
InMail POP3 Setup – Server Name
Set the POP3 server name. If the DNS server
setting is not assigned in Program 90-11-11 the
IP Address must be used instead of the name.
Maximum of 48 characters.
InMail POP3 Setup – POP3 Port
Set the POP3 server port.
InMail POP3 Setup – SSL Encryption
Enable SSL encryption.
InMail POP3 Setup – User Name
Set the user name for POP3 authentication.
Maximum of 48 characters.
InMail POP3 Setup – Password
Set the password for POP3 authentication.
Maximum of 48 characters.
System Alarm Report – DNS Primary
Address
Assign the primary DNS IP Address. If this
setting is not assigned, the IP Address must be
used in Program 47-18-02 and 47-19-01
instead of the name.
0.0.0.0 ~ 255.255.255.255
System Alarm Report – DNS Secondary
Address
Assign the secondary DNS server IP Address.
0.0.0.0 ~ 255.255.255.255
Operation
Refer to the InMail System Guide for more information about this feature.
To Next Page
Loading...
