NEC Univerge SV9100 - Page 712

712
Supported System Feature List (Continued)
Feature Name
ML440
G566
G266
Comments
Transfer
Yes
Yes
Yes
ML440 – Supervised and Unsupervised.
G566/G266 – Supervised only.
Trunk Group Routing
Yes
Yes
Yes
Trunk Groups
Yes
Yes
Yes
Trunk Queuing/Camp-On
Yes
No
No
Ml440 must use feature key programmed with Trunk
Queue function (35).
UM8000 Mail
Yes
Yes
Yes
Voice mail softkeys are not provided to ML440/G566/
G266 handsets.
Uniform Call Distribution (UCD)
Yes
Yes
Yes
G566/G266 handsets can be members of a UCD
group, but since they do not support programmable
feature keys have no way to remove or add
themselves to the group.
Uniform Numbering Network
Yes
Yes
Yes
User Programming Ability
Yes
No
No
Virtual Extensions
Yes
No
No
Voice Mail Integration (Analog)
Yes
Yes
Yes
Voice Over
Yes
No
No
ML440 can initiate voice over but cannot respond to a
voice from another extension.
Voice Over Internet Protocol (VoIP)
Yes
Yes
Yes
By nature, these are SIP devices.
Voice Response System (VRS) –
Call
Yes
No
No
The ML440 can be used to record and erase VRS
messages. However, no beep to record or
confirmation beep is provided, so it is not
recommended.
Volume Controls
Yes
Yes
Yes
Volume control is a function of the ML440/G566/G266
handset, not the phone system.
Default Setting
None
System Availability
Terminals
ML440 Handset
G566 Handset
G266 Handset
Required Component(s)
AP400 Base Unit
IP Terminal License (5111) – 1 for each G566 or G266 handset
IP Terminal License (5111) – 1 for each ML440 handset
DAP Controller PC