NEC Univerge SV9100 - Page 772

772
Program
Number
Program Name/Description
Input Data
Default
84-13-33
SIP Trunk CODEC Information Basic Setup –
Number of G.722 Audio Frames
Define the number of G.722 Audio Frames.
1 ~ 4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
(Profile 1 ~ Profile 2)
3
84-13-35
SIP Trunk CODEC Information Basic Setup –
G.722 Jitter Buffer (min)
Define the minimum level for the G.722 jitter
buffer.
0 ~ 300ms
(Profile 1 ~ Profile 2)
30
84-13-36
SIP Trunk CODEC Information Basic Setup –
G.722 Jitter Buffer (average)
Define the average level for the G.722 Jitter
Buffer.
0 ~ 300ms
(Profile 1 ~ Profile 2)
60
84-13-37
SIP Trunk CODEC Information Basic Setup –
G.722 Jitter Buffer (max)
Define the Max level for the G.722 Jitter buffer.
0 ~ 300ms
(Profile 1 ~ Profile 2)
120
84-13-38
SIP Trunk CODEC Information Basic Setup –
Number of G.726 Audio Frames
Define the number of G.726 audio frames.
1 ~ 4
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
(Profile 1 ~ Profile 2)
3
84-13-39
SIP Trunk CODEC Information Basic Setup –
G.726 VAD Mode
Enable/Disable the VAD mode for G.726.
0 = Disable
1 = Enable
(Profile 1 ~ Profile 2)
0
84-13-40
SIP Trunk CODEC Information Basic Setup –
G.726 Jitter Buffer (min)
Define the minimum level for the G.726 jitter
buffer.
0 ~ 300ms
(Profile 1 ~ Profile 2)
30
84-13-41
SIP Trunk CODEC Information Basic Setup –
G.726 Jitter Buffer (average)
Define the average level for the G.726 jitter
buffer.
0 ~ 300ms
(Profile 1 ~ Profile 2)
60
84-13-42
SIP Trunk CODEC Information Basic Setup –
G.726 Jitter Buffer (max)
Define the max level for the G.726 jitter buffer.
0 ~ 300ms
(Profile 1 ~ Profile 2)
120
84-13-49
SIP Trunk CODEC Information Basic Setup –
RTP Filter
To avoid incorrect voice pass connection, this
program checks the sending side address from
received RTP packet at VoIPDB.
0 = Disable
1 = Enable
(Profile 1 ~ Profile 2)
0