NEC Univerge SV9100 - Page 80

80
Program
Number
Program Name/Description
Input Data
Default
80-03-06
DTMF Tone Receiver Setup – Backwards
Twist Level
Define the backwards twist level for DTMF Tone
Receiver.
0 ~ 9
(1dB ~ 10dB)
Type 1 = 0
(1dBm)
Type 2 = 0
(1dBm)
Type 3 = 0
(1dBm)
Type 4 = 0
(1dBm)
Type 5 = 0
(1dBm)
80-03-07
DTMF Tone Receiver Setup – ON Detect
Time
Define the On detection time for DTMF Tone
Receiver.
1 ~ 255
(15+ 15ms ~ 3825ms)
Type 1 = 1
(30ms)
Type 2 = 1
(30ms)
Type 3 = 1
(30ms)
Type 4 = 1
(30ms)
Type 5 = 1
(30ms)
80-03-08
DTMF Tone Receiver Setup – OFF Detect
Time
Define the Off detection time for DTMF Tone
Receiver.
1 ~ 255
(15+ 15ms ~ 3825ms)
Type 1 = 1
(30ms)
Type 2 = 1
(30ms)
Type 3 = 1
(30ms)
Type 4 = 1
(30ms)
Type 5 = 1
(30ms)
Recognize Extension Location when Logging In with Netlink:
Program
Number
Program Name/Description
Input Data
Default
26-01-01
Automatic Route Selection Service – ARS
Service
Enable/Disable ARS.
0 = Disable (Off)
1 = Enable (On)
0
26-01-03
Automatic Route Selection Service – ARS
Misdialed Number Handling
If a user dials a number not programmed in
ARS, determine if the system should Route
over trunk group 1 (0) or Play error tone (1).
0 = Route to Trunk Group 1
1 = Play Warning Tone to Dialer
0