NEC Univerge SV9100 - Page 801

801
Program
Number
Program Name/Description
Input Data
Default
10-03-09
ETU Setup (PRTA PKG Setup) – Dial
Information Element
ISDN protocol definition. If Overlap Sending is
selected in Program 10-03-08, select either 0 or
1 for the dial information element.
0 = Keypad Facility
1 = Called Party Number
0
10-03-18
ETU Setup (PRTA PKG Setup) – Type of
Number
Select the number type for the ISDN circuit.
0 = Unknown
1 = International number
2 = National number
3 = Network Specific number
4 = Subscriber number
5 = Abbreviated number
2
10-03-19
ETU Setup (PRTA PKG Setup) – Numbering
Plan Identification
Select the Numbering Plan used for the ISDN
circuit.
0 = Unknown
1 = ISDN numbering plan
2 = Data numbering plan
3 = Telex numbering plan
4 = National standard
numbering plan
5 = Private numbering plan
1
10-03-20
ETU Setup (PRTA PKG Setup) – Network
Exchange Selection
Select the ISDN protocol for the ISDN circuit.
0 = Standard (Same as NI-2)
1 = reserved
2 = reserved
3 = DMS (A211)
4 = 5ESS
5 = DMS (A233)
6 = 4ESS
7 = NI-2
0
10-03-21
ETU Setup (PRTA PKG Setup) – PRI Number
of Ports
Select the number of ports for the PRI.
0 = Auto
1 = 4 Ports
2 = 8 Ports
3 = 12 Ports
4 = 16 Ports
5 = 20 Ports
0
10-39-01
Fractional Setup
Enable/Disable the T1/PRI fractional function.
0 = Disable
1 = Enable
0
14-05-01
Trunk Group – Trunk Group Number
Assign trunks to trunk groups then go to
Program 14-06-01 below to set up Trunk Group
Routing.
Trunk Port 1 ~ 400 =
Priority 1 ~ 400
Default = Trunks
1 ~ 400 assigned
to trunk group 1
with priorities
equal to the
trunk number.
Trunk 1 = Priority
1 Trunk 400 =
Priority 400.
21-01-03
System Options for Outgoing Calls – Trunk
Interdigit Time (External)
The time the system waits for the timer to
expire before placing the call in a talk state.
0 ~ 64800 seconds
5