NEC Univerge SV9100 - Page 825

825
Program
Number
Description
System A Setting
System B Setting
14-05-01
First setting data. Put CCISoIP trunks in trunk group 10.
10
10
14-05-01
Second setting data. Set priorities 1 ~ 8 for trunks 9 ~ 16.
1 ~ 8
1 ~ 8
26-01-01
Enable ARS services.
1
1
26-02-01
For table entry 1, enter 5 wildcard characters.
@@@@@
N/A
26-02-02
For table entry 1, set service type to F-Route (2).
2
N/A
26-02-03
For table entry 1, set additional data to F-Route table 2.
2
N/A
26-03-01
Set ARS Treatment 1 to sent the number including the trunk access
code of 9 to System B.
D019RE
N/A
44-02-01
Closed numbering setup – Set to first digit of remote system
extension number.
2
1
44-02-02
Closed numbering setup – Set to F-Route table (2).
2
2
44-02-03
Closed numbering setup – Set to use F-Route table 1 for intercom
calls.
1
1
44-05-01
Closed numbering setup – Set table 1 first priority to use CCIS trunk
group 10.
10
10
44-05-09
Closed numbering setup – Set table 1 first priority maximum digit
length to 3.
3
3
44-05-10
Closed numbering setup – Set table 1 first priority to remote system
point code.
2
1
44-05-01
ARS Routing – Set table 2 first priority to CCIS trunk group 10.
10
N/A
44-05-08
ARS Routing – Set table 2 first priority to dial treatment 1.
1
N/A
44-05-09
ARS Routing – Set table 2 first priority maximum dialing digit 11.
11
N/A
44-05-10
ARS Routing – Set table 2 first priority to System B point code (2).
2
N/A
44-05-01
ARS Routing – Set table 2 second priority to local trunk group 1.
1
N/A
44-05-09
ARS Routing – Set table 2 second priority maximum dialing digit 10.
10
N/A