NEC Univerge SV9100 - Page 842

842
Related Features
 Central Office Calls, Answering
 Central Office Calls, Placing
 Direct Inward System Access (DISA)
 Multiple Trunk Types
 Warning Tone for Long Conversation
Guide to Feature Programming
Program
Number
Program Name/Description
Input Data
Default
14-01-14
Basic Trunk Data Setup – Long
Conversation Cutoff
Enable/Disable a trunk ability to disconnect
incoming and outgoing central office calls
automatically.
0 = Disable
1 = Enable
0
14-01-15
Basic Trunk Data Setup – Long
Conversation Alarm Before Cut Off
Enable/Disable the Long Conversation Alarm
for each trunk.
0 = Disable
1 = Enable
0
20-06-01
Class of Service for Extensions
Assign a Class of Service (1 ~ 15) to
extensions.
Day Night/Mode: 1 ~ 8
Class of Service of Extensions
(1 ~ 15)
Extension port
101 = Class 15
All other
extension port =
Class 1
20-13-02
Class of Service Options (Supplementary
Service) – Long Conversation Cutoff
(Incoming)
Turn Off or On an extension user ability to use
Long Conversation Cutoff for incoming calls.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-13-03
Class of Service Options (Supplementary
Service) – Long Conversation Cutoff
(Outgoing)
Turn Off or On an extension user ability to use
Long Conversation Cutoff for outgoing calls.
0 = Off
1 = On
COS 1 ~ 15 = 0
20-21-03
System Options for Long Conversation –
Long Conversation Cutoff for Incoming Call
Enter the time the system waits before
disconnecting incoming trunks.
0 ~ 64800 seconds
0
20-21-04
System Options for Long Conversation –
Long Conversation Cutoff for Outgoing Call
Enter the time the system waits before
disconnecting outgoing trunks.
0 ~ 64800 seconds
0
Operation
This feature is automatic once it is programmed.