NEC Univerge SV9100 - Page 848

848
Single Line Telephone
1. While on a call, hookflash and dial #1.
2. Dial *1 and the Combined Paging Zone code 1~8 (for Internal/External Zones 1~8) or 0 (for
Internal/External All Call).
3. Announce the zone.
4. When a co-worker answers your page, press hookflash twice.
5. Repeat steps 1~4 for each co-worker you want to add.
To join a Meet Me Internal Conference:
1. At the multiline terminal, press Speaker (or lift the handset).
- OR -
At the single line telephone, lift the handset.
2. Dial 863 (if your extension is in the zone called).
- OR -
Dial 864 and the zone number (if your extension is not in the zone called).
- OR -
Press the Meet Me Conference/Paging Pickup key (Program 15-07 or 23) if your extension is in
the zone called.