NEC Univerge SV9100 - Page 879

879
Supported Service Codes (Continued)
Type Incoming Feature
Program
Set By
Mobile
Extension
Set to Mobile
Extension
General Purpose Relay
11-12-50
Yes
VM Access (InMail and VMS)
11-12-51
Yes
Live Recording at SLT
11-12-53
Yes
VRS Routing for ANI/DNIS
11-12-54
Yes
Tandem Trunking
11-12-57
Yes
Transfer into Conference
11-12-58
Yes
Set DND for Other Extension
11-14-03
Yes
Yes
Cancel DND for Other Extension
11-14-04
Yes
Yes
Set Wake Up Call for Own Extension
11-14-05
Yes
Cancel Wake Up Call for Own Extension
11-14-06
Yes
Set Wake Up Call for Other Extension
11-14-07
Yes
Yes
Cancel Wake Up Call for Other Extension
11-14-08
Yes
Yes
Set Room to Room Call Restriction
11-14-09
Yes
Yes
Cancel Room to Room Call Restriction (Hotel)
11-14-10
Yes
Yes
Change Toll Restriction Class for Other Extension
11-14-11
Yes
Yes
Check-in
11-14-12
Yes
Yes
Check-out
11-14-13
Yes
Yes
Room Status Change for Own Extension
11-14-14
Yes
Room Status Change for Other Extension
11-14-15
Yes
Yes
Room Status Output
11-14-16
Yes
Hotel Room Monitor
11-14-17
Yes
Yes
Although some features may be available to the Mobile Extension, it may be advisable to disable them in
Class of Service. There are also features that should be disabled in any case.
The features to be disabled/not used for Mobile Extension include:
Contact Centre
TAPI (including applications such as UC Desktop Suite, etc.)
H.323 Trunks
Analog Trunks
Port Swap
Hotline
General Message
Message Waiting
Headset Mode for single line telephone
Flexible Transfer/Virtual Loop Back