12 Jam Detection Continuous Count
[02 to 10/1]
This setting is enabled only when SP5508-4 is enabled (set to 1).
13 Door Open: Time Length
[03 to 30/1]
This setting is enabled only when SP5508-4 is enabled (set to "1").
5515 SC/Alarm Setting
1 SC Call
2 Service Parts Near End Call
3 Service Parts End Call
4 User Call
[0 to 1/1/1] 0: Off 1: On
6 Communication Test Call
7 Machine Information Notice
8 Alarm Notice
[0 or 1/1/1 ] 0: Off 1: On
9 Non-Genuine Toner Alarm
10 Supply Automatic Ordering Call
11 Supply Management Report Call
[0 to 1/1/1]
12 Jam/Door Open Call
[0 to 1/1/1]
50 Timeout:Manual Call
[1 to 255 / 5 / 1 min]
Main SP Tables-5
95
To Next Page
Loading...
