250 Auto Nozzle Check Wiper Pos Detect HP Sen
251 Auto Nozzle Check Wiper Pos Detect
Output Check Table (SP5-804)
5804 Output Check
Most of these sensors present [OFF] [ON] selections. After pressing the [ON] selection,
be sure to press [OFF] to switch the component off.
51 Paper Feed Motor: Upper
52 Paper Feed Motor Speed: Upper
53 Paper Feed Motor: Lower
54 Paper Feed Motor Speed: Lower
55 Paper Feed Clutch: Upper
56 Paper Feed Clutch: Lower
59 Sub Scan Motor
60 Sub Scan Motor Speed
63 Move Cutter Toward Right
64 Move Cutter Toward Left
65 Start Suction Fan
66 Suction Fan Speed
67 Suction Fan Revolution
68 MCU Cooling Fan
69 PSU Cooling Fan
71 DRESS LED On
72 Manual feed clutch
100 Auto Nozzle Check LED On
110 Air Release Solenoid On/Off
Input and Output Check
267