Ricoh MP CW2201 Service Manual

10. Tighten the screws indicated by the arrows ( x10).
11. Fasten the removed screws on the left of the machine ( x3).
Clamping the Power Cord
1. Make sure that the power cord is not connected to the power source.
2. Attach the medium-size clamp, connect the power cord [A], and then close the clamp (
x3).
• Do not connect the power cable to the power source at this time.
Main Machine Installation
111

Ricoh MP CW2201 Specifications

General

Color Printing	Yes
Scan Resolution	600 dpi
Standard Interfaces	Ethernet, USB
Paper Size	A4
Operating Systems	Windows
Power Source	AC 100-240V, 50/60Hz