Ricoh MP CW2201 Service Manual

• Fold the electrode pin harness to the left above the carriage front cover line as shown in the
illustration below.
16. When the color print head replacement terminates, reset the counter and perform the
initial filling sequence. (Print Head Unit)
After the Print Head Unit Replacement
When the print head unit replacement terminates, reset the counter with SP and fill the ink. When the
black print head is replaced, adjust the density.
Then adjust the head position.
4. Replacement and Adjustment
462

Ricoh MP CW2201 Specifications

General

Color Printing	Yes
Scan Resolution	600 dpi
Standard Interfaces	Ethernet, USB
Paper Size	A4
Operating Systems	Windows
Power Source	AC 100-240V, 50/60Hz