Ricoh MP CW2201 Service Manual

5. Release the clamp of the sensor bracket and pull away the harness ( x2).
6. Remove the encoder sensor [A] ( (white) x1, x3).
7. Remove the encoder sensor [B] ( (black) x1, x3).
Cleaning
Clean the sensors with a blower brush.
Roll Units
333

Ricoh MP CW2201 Specifications

General

Color Printing	Yes
Scan Resolution	600 dpi
Standard Interfaces	Ethernet, USB
Paper Size	A4
Operating Systems	Windows
Power Source	AC 100-240V, 50/60Hz