Ricoh MP CW2201 - Page 1024

50 1284 Compatibility (Centro)
[0 or 1/1/1/step]
0: Disabled, 1: Enabled
52 ECP (Centro)
[0 or 1/1/1/step]
0: Disabled, 1: Enabled
Note: This SP is activated only when SP5-828-50 is set to "1".
65 Job Spooling
[0 or 1/0/1/step]
0: Disabled, 1: Enabled
66 Job Spooling Clear: Start Time
0: ON (Data is cleared)
1: OFF (Automatically printed)
69 Job Spooling (Protocol)
0: Validates
1: Invalidates
bit0: LPR
bit1: FTP
bit2: IPP
bit3: SMB
bit4: BMLinkS
bit5: DIPRINT
bit6: sftp
bit7: wsprnd
87 Protocol usage
90 TELNET (0: OFF 1: ON)
[0 or 1/1/– ]
0: Disable, 1: Enable
3. SP Mode Tables
116