2 Machine ID Clear (For Delivery Server)
3 Maximum Entries
[2000 to 20000/ 2000 /1 /step]
6 Delivery Server Retry Timer
[0 to 255/0/1 /step]
7 Delivery Server Retry Times
[0 to 255/0/1 /step]
8 Delivery Server Maximum Entries
[2000 to 50000/2000/1/step]
10 LDAP Search Timeout
[1 to 255/60/1 /step]
21 Fold Auth Change
40 Addr Book Migration (SD -> HDD) Not Used
41 Fill Addr Acl Info.
This SP must be executed immediately after installation of an HDD unit in a basic
machine that previously had no HDD. The first time the machine is powered on with the
new HDD installed, the system automatically takes the address book from the NVRAM
and writes it onto the new HDD. However, the new address book on the HDD can be
accessed only by the system administrator at this stage. Executing this SP by the service
technician immediately after power on grants full address book access to all users.
Procedure
1. Turn the machine off.
2. Install a new HDD.
3. Turn the machine on.
4. The address book and its initial data are created on the HDD automatically.
However, at this point the address book can be accessed by only the system
administrator or key operator.
6. Enter the SP mode and do SP5846-041. After this SP executes successfully, any user
can access the address book.
3. SP Mode Tables
122
To Next Page
Loading...
