8066 L:FIN Jobs
[0 to 9999999/ 0 / 1]
These SPs total finishing methods for jobs output from within the document server mode
screen at the operation panel. The finishing method is specified from the print window
within document server mode.
8067 O:FIN Jobs
[0 to 9999999/ 0 / 1]
These SPs total finishing methods for jobs executed by an external application, over the
network. The finishing method is specified by the application.
1 Sort Number of jobs started in Sort mode. When a stored copy job
is set for Sort and then stored on the document server, the L:
counter increments. (See SP8066 1)
2 Stack Number of jobs started out of Sort mode.
3 Staple Number of jobs started in Staple mode.
4 Booklet Number of jobs started in Booklet mode. If the machine is in
staple mode, the Staple counter also increments.
5 Z-Fold Number of jobs started In any mode other than the Booklet
mode and set for folding (Z-fold).
6 Punch Number of jobs started in Punch mode. When Punch is set for
a print job, the P: counter increments. (See SP8064 6.)
7 Other Reserved. Not used.
8 Inside-Fold
9 Three-in-Fold
10 Three-Out-Fold
11 Four-Fold
12 Kannon-Fold
13 Perfect Bind
14 Ring Bind
15 3rd Vendor
Main SP Tables-8
201
To Next Page
Loading...
Need help?
General
