• Previews done with a scanner driver are not counted.
• A count is done only after all images of a job have been scanned.
• Scans made in SP mode are not counted.
Examples:
• If 3 B5 pages and 1 A3 page are scanned with the scanner application but not stored, the S: count
is 4.
• If both sides of 3 A4 sheets are copied and stored to the document server using the Store File
button in the Copy mode window, the C: count is 6 and the L: count is 6.
• If both sides of 3 A4 sheets are copied but not stored, the C: count is 6.
• If you enter document server mode then scan 6 pages, the L: count is 6.
8211 T:Scan PGS/LS
8212 C:Scan PGS/LS
8215 S:Scan PGS/LS
8216 L:Scan PGS/LS
These SPs count the number of pages scanned into the document server.
[0 to 9999999/ 0 / 1]
The L: counter counts the number of pages stored from within the document server mode
screen at the operation panel, and with the Store File button from within the Copy mode
screen
• Reading user stamp data is not counted.
• If a job is cancelled, the pages output as far as the cancellation are counted.
• If the scanner application scans and stores 3 B5 sheets and 1 A4 sheet, the S: count is 4.
• If pages are copied but not stored on the document server, these counters do not change.
• If both sides of 3 A4 sheets are copied and stored to the document server, the C: count is 6 and the
L: count is 6.
• If you enter document server mode then scan 6 pages, the L: count is 6.
8221 ADF Org Feeds
[0 to 9999999/ 0 / 1]
These SPs count the number of pages fed through the ADF for front and back side
scanning.
1 Front
3. SP Mode Tables
206
To Next Page