Ricoh MP CW2201 Service Manual

2. Use a damp cloth to clean the area [B] on the rear cover.
• Hook and loop fastener patches and clamps are to be attached to area [B] to clamp the
antenna cables. To avoid Hook and loop fastener patches and clamps being removed, clean
the area.
3. Peel the tape from the back of a Hook and loop fastener patch [1].
2. Installation
154

Ricoh MP CW2201 Specifications

General

Color Printing	Yes
Scan Resolution	600 dpi
Standard Interfaces	Ethernet, USB
Paper Size	A4
Operating Systems	Windows
Power Source	AC 100-240V, 50/60Hz