Ricoh MP CW2201 Service Manual

4. Disconnect the top cover ( x7).
5. Lift the cover and remove it.
• Do not attempt to print with the top cover removed. Light striking the exit sensor with the
cover removed will cause paper to jam.
Reinstallation
1. Before fastening the screws, make sure that the bosses fit into the holes in the rear
edge of the top cover.
4. Replacement and Adjustment
246

Ricoh MP CW2201 Specifications

General

Color Printing	Yes
Scan Resolution	600 dpi
Standard Interfaces	Ethernet, USB
Paper Size	A4
Operating Systems	Windows
Power Source	AC 100-240V, 50/60Hz