Code Contents Solutions
44 The data to be overwritten cannot
be accessed when controller-
related programs are
downloaded.
• Switch the main power supply off and on to
try again.
• Install the correct ROM update data in the
SD card.
• Replace the controller board if the data to
be overwritten is contained on the controller
board.
49 Firmware updates are currently
prohibited.
• The setting of Update Firmware in the
Administrator Tools has been set to [Prohibit]
by an administrator. Amend the setting to
[Do not Prohibit] and try again.
50 The results of the electronic
authorization check have rejected
the update data.
• Install the correct ROM update data in the
SD card.
57 @Remote is not connected at the
date/time reserved for receiving
the package firmware update
from the network.
• Check the @Remote connection.
58 Update cannot be done due to a
reception route problem.
• Check the @Remote connection.
59 HDD is not mounted. • Check the HDD connection.
60 HDD could not be used during the
package firmware update.
• Try again.
• Replace the HDD if the download fails
again.
61 The module ID for the package
firmware update is incorrect.
• Prepare the correct package files.
62 The configuration of the package
firmware update files is incorrect.
• Prepare the correct package files.
63 Reception fails due to the power
off at the reserved date/time of
the remote firmware update from
the network.
• Update is to be done automatically when
the next reception time has elapsed.
5. System Maintenance Reference
602
To Next Page
Loading...
Need help?
General
