• Enter the NVRAM data manually using the SMC print you created before uploading the NVRAM
data.
1. Switch the copier main power switch off.
2. Remove the SD slot cover. ( × 1)
3. Insert the SD card with the NVRAM data into SD Card Slot 2 (lower).
4. Switch the copier main power switch on.
5. Do SP5-825-001 (NVRAM Data Download) and touch [EXECUTE].
• The serial number of the file on the SD card must match the serial number of the machine for
the NVRAM data to download successfully. The download fails if the serial numbers do not
match.
This procedure does not download the following data to the NVRAM:
• Total Count
• C/O, P/O Count
5. System Maintenance Reference
632
To Next Page
Loading...
