Result Code Cause Solutions
2 (INVALID REQUEST) A file import was
attempted between
different models or
machines with different
device configurations.
Import files exported from the same model
with the same device configurations.
4 (INVALID OUTPUT
DIR)
Failed to write the device
information to the
destination device.
Check whether the destination device is
operating normally.
7( MODULE ERROR) An unexpected error
occurred during import
or export.
Switch the power off and then back on, and
then try the operation again. If the error
persists, contact your supervisor.
8 (DISK FULL) The available storage
space on the external
medium is insufficient.
Execute the operation again after making sure
there is enough storage space.
9 (DEVICE ERROR) Failed to write or read
the log file.
Check whether the path to the folder for
storing the file or the folder in which the file is
stored is missing.
10 (LOG ERROR) The hard disk is faulty. Contact your supervisor.
UP/SP Data Import/Export
647
To Next Page
Loading...
Need help?
General
