• Inch
11 sensors: 10 original width sensors and the original set sensor [1] which also functions as a
width sensor. The NA machine has one additional width sensor [2] (30") .
• The sensors to the left of center (set sensor position "0") detect B series (Metric) or Architecture
(USA) sizes.
• The sensors to the right of center (set sensor position "0") detect A series (Metric) or Engineering
(USA) sizes.
• If only one original sensor is detects a paper, the machine detects an A4 or 8 ½" "A" size SEF
original.
7. Detailed Description
776
To Next Page
Loading...
