6. Select the paper feed location for adjusting, and touch [Print Test Sheet].
7. Touch [Start Printing].
8. Check the test sheet.
To determine the adjustment value, the optimal adjustment value is the number above the square
pattern that has the faintest color closest to gray and aligned vertical lines on both sides. If the
number appeared to the left of the lightest gray square with straight horizontal lines on both sides is
"+2", the adjustment value is "+2".
• Even for the pattern with the lightest gray square, if the horizontal lines are not straight, select
the value referring to the above or below pattern whose horizontal lines are misaligned in the
opposite direction. For example, "+2" square is the faintest and the horizontals on both sides
of "+6" are in the opposite direction to "+2", so the adjustment value is between "+3" and
"+5"depending on the degree of misalignment. After completing the adjustment, adjust the
paper feed again to check if the optimal adjustment value is set.
9. Select the paper feed location for adjusting, and touch [Adjustment].
10. Touch the plus or minus button to enter the value and touch [OK].
11. Touch [Exit].
12. Touch [User Tools] on the top right of the screen.
7. Detailed Description
882
To Next Page
Loading...
Need help?
General
