For example, if the center of the horizontal line is printed 4 mm from the top edge of the test sheet,
the adjustment value of Top Margin is "1.0 mm".
In the same manner, if the center of the vertical line is printed 8 mm from the left edge of the test
sheet, the adjustment value of Left Margin is "-3.0mm".
9. Select the paper feed location for adjusting, and touch [Adjustment].
10. Enter the adjustment value, and touch [OK].
• Touch the Up or Down button to adjust the Top Margin and the Left or Right button to adjust
the Left Margin.
11. Touch [Exit].
12. Touch [User Tools] on the top right of the screen.
13. Touch [Home] at the bottom of the screen in the center.
7. Detailed Description
884
To Next Page
Loading...
Need help?
General
