1 [-10 to 10/0.0/0.1 mm]
1925 Cutter Simultaneous Drive Adj
1 Cut Timing [0.1 to 1.0 / 0.3 / 0.1]
1926 Carriage Updown Adjustment
1 Updown Time [-5.0 to 5.0 / 0.0 / 0.1]
1930 Manual Cut
1 Active Roll [0 to 2 / 1 / 1]
2 Roll 1 [0 to 2 / 1 / 1]
3 Roll 2 [0 to 2 / 1 / 1]
10 Jam [0 or 1 / 0 / 1]
Main SP Tables-1
25