Ricoh MP CW2201 - Page 942

1 Execute Elect. Plate Wiping
Sequence
[0 or 1 / 0 / 1]
3 Execute Outward Only [0 or 1 / 0 / 1]
4 Execute Wiping HP Detection [0 or 1 / 0 / 1]
6 Reset Elect. Plate Wiping
Count.
[0 or 1 / 0 / 1]
2024 Auto Nozzle Check Replacement
1 Retract Carriage [0 or 1 / 0 / 1]
2 Retract Cutter [0 or 1 / 0 / 1]
3 Move Auto Nozzle Check
Wiper
[0 or 1 / 0 / 1]
4 Reset:Freqcy,Accumulatn
Count/Md Replacemt
[0 or 1 / 0 / 1]
5 Execute Elect. Plate Wiping
Sequence
[0 or 1 / 0 / 1]
2025 Auto Nozzle Check Maintenance
1 Recovery CL Upper Limit ENG* [0 to 255 / 6 / 1]
2025 Auto Nozzle Check Maintenance
2 Recovery CL Continuous
Count H1
[0 to 255 / 0 / 1]
3 Recovery CL Continuous
Count H2
[0 to 255 / 0 / 1]
4 Recovery CL Continuous
Count H3
[0 to 255 / 0 / 1]
5 Recovery CL Continuous
Count H4
[0 to 255 / 0 / 1]
6 Recovery CL Continuous
Count H5
[0 to 255 / 0 / 1]
3. SP Mode Tables
34