SMC Networks LECSN-T Series User Manual

19 - 139
19．EtherNet/IP COMMUNICATION
(34) Alarm Monitor 8 Regenerative load ratio (2B88h)
Ins ID
Attr ID
Access
Name
Data Type
2B88h
0
Get
Alarm Monitor 8 Regenerative load ratio
UINT
Ins ID
Attr ID
Default
Range
Units
EEP-ROM
Parameter
2B88h
0
0000h to FFFFh
%
Impossible
The regenerative load ratio at alarm occurrence is returned.
(35) Alarm Monitor 9 Effective load ratio (2B89h)
Ins ID
Attr ID
Access
Name
Data Type
2B89h
0
Get
Alarm Monitor 9 Effective load ratio
UINT
Ins ID
Attr ID
Default
Range
Units
EEP-ROM
Parameter
2B89h
0
0000h to FFFFh
%
Impossible
The effective load ratio at alarm occurrence is returned.
(36) Alarm Monitor 10 Peak load ratio (2B8Ah)
Ins ID
Attr ID
Access
Name
Data Type
2B8Ah
0
Get
Alarm Monitor 10 Peak load ratio
UINT
Ins ID
Attr ID
Default
Range
Units
EEP-ROM
Parameter
2B8Ah
0
0000h to FFFFh
%
Impossible
The peak load ratio at alarm occurrence is returned.
(37) Alarm Monitor 11 Instantaneous torque (2B8Bh)
Ins ID
Attr ID
Access
Name
Data Type
2B8Bh
0
Get
Alarm Monitor 11 Instantaneous torque
INT
Ins ID
Attr ID
Default
Range
Units
EEP-ROM
Parameter
2B8Bh
0
8000h to 7FFFh
%
Impossible
The instantaneous torque at alarm occurrence is returned.
(38) Alarm Monitor 12 Within one-revolution position (2B8Ch)
Ins ID
Attr ID
Access
Name
Data Type
2B8Ch
0
Get
Alarm Monitor 12 Within one-revolution position
DINT
Ins ID
Attr ID
Default
Range
Units
EEP-ROM
Parameter
2B8Ch
0
80000000h to 7FFFFFFFh
pulse
Impossible
The position within one-revolution at alarm occurrence is returned.

SMC Networks LECSN-T Series Specifications

General

Brand	SMC Networks
Model	LECSN-T Series
Category	Controller
Language	English