Xerox Phaser 6128MFP - Page 150

3-30 Phaser 6128MFP Service Manual
Error Messages and Codes
IIT Memory Full
Error 062-324
Job too Large
Press OK Button
<IIT Memory Over Flow>
The amount of scanning data
exceeded memory capacity.
page 3-128
IIT Scanner Sensor Error
Error 062-360
Restart Printer
<HP Sensor Error>
Scanner Home Position error.
page 3-132
IIT Scanner Lamp Error
Error 062-371
Restart Printer
<IIT Lamp Error>
The IIT Lamp error occurred.
page 3-132
IIT Scanner Error
Error 062-393
Restart Printer
<CCD ASIC Error>
The CCD ASIC communication
error occurred.
page 3-129
Jam Jam at Tray
Check Tray
Open Front Cover
<IOT Tray 1 Misfeed JAM>
Registration Sensor is not
turned ON within the specified
time after feeding from Tray.
page 3-37
Jam Insert Output to Tray <IOT Side 2 No paper>
Media was not reloaded in
Tray for duplex printing.
page 3-77
Jam Press OK Button to
continue
<IOT Side 2 No paper>
Media was not reloaded in
Tray for duplex printing.
page 3-77
Jam Jam at Manual Feed
Slot
Chk Manual Feed
Open Front Cover
<IOT SSF Misfeed JAM>
Registration Sensor is not
turned ON within the specified
time after feeding from
manual feed slot
page 3-47
Jam Jam at Front Cover
Open Front Cover and
Remove Paper
<IOT SSF Insert JAM>
Manual feed No Paper Sensor
detected when media inserted
into manual feed slot.
page 3-41
Jam Chk Manual Feed
Remove Paper
Open and close Front
Cover
<IOT SSF Paper Pullout JAM>
Attempted feed rom manual
feed slot. Media was not
loaded or was pulled out.
page 3-47
Jam Insert Output to
Manual Feed
<IOT Side 2 No paper>
Media was not reloaded into
the manual feed slot for
duplex printing.
page 3-80
Jam Press OK Button to
continue
<IOT Side 2 No paper>
Media was not reloaded into
manual feed slot for duplex
printing.
page 3-80
Jam Remove paper from
Manual Feed
<IOT SSF No Paper>
Waiting for reseat media in
manual feed slot.
page 3-81
Error Message Summary (continued)
System Error Message Error Type Go to