Parameter Value
Output type Non-protected
Protection type External fuse on each channel
Rated protection fuse (for each channel) On request
Demagnetization when inductive loads are
switched off
Must be performed externally according to
driven load specification
Switching Frequencies
With inductive loads On request
Short-circuit-proof / Overload-proof No
Overload message No
Output current limitation No
Resistance to feedback against 24 V DC No
Connection of 2 outputs in parallel Not possible
Max. cable length
Shielded On request
Unshielded On request
Part no. Description Product life cycle phase *)
1SAP 187 000 R0003 TA5110-2DI2DOT: AC500, option
board for digital I/O extension, 2DI 24
V DC, 2DO-T 24 V DC / 0.5 A, spring/
cable front terminal 3.50 mm pitch
Active
Spare parts
1SAP 187 400 R0014
**)
TA5220-SPF7: spring terminal block,
removable, 7-pin, spring front, cable
front, 6 pieces per packing unit
Active
*) Modules in lifecycle Classic are available from stock but not recommended
for planning and commissioning of new installations.
**) The needed spring terminal block is always delivered with the option board.
The terminal block listed in the table is for spare part only if needed.
Ordering data
Processor modules > AC500-eCo
2022/01/31 3ADR010278, 3, en_US 71
To Next Page
Loading...
