Parameter Value
Undefined signal -15 V...+ 5 V +5 V...+15 V
Signal 1 -30 V...-15 V +15 V...+30 V
Ripple with signal 0 -5 V...+3 V -3 V...+5 V
Ripple with signal 1 -30 V...-15 V +15 V...+30 V
Input current per channel
Input voltage +24 V Typ. 5 mA
Input voltage +5 V Typ. 1 mA
Input voltage +15 V < 3 mA
Input voltage +30 V < 7 mA
Max. permissible leakage current (at 2-wire proximity
switches)
1 mA
Input delay (0->1 or 1->0) Typ. 8 ms
Input data length 1 byte
Max. cable length
Shielded On request
Unshielded On request
Table 32: Technical data of the digital outputs
Parameter Value
Number of channels per module 2 transistor outputs (24 V DC, 0.5 A max.)
Distribution of the channels into groups 1 group of 2 channels
Connection of the channels O0 to O1 Terminals 4 to 5
Reference potential for the channels O0 to O17 Terminal 7 (negative pole of the process
voltage, name ZP)
Common power supply voltage Terminal 6 (positive pole of the process
voltage, name UP)
Indication of the output signals 1 yellow LED per channel; the LED is on
when the output signal is high (signal 1)
and the module is powered via the I/O bus
Monitoring point of output indicator Controlled together with transistor
Way of operation Non-latching type
Min. output voltage at signal 1 UP - 0.1 V
Output delay
0 to 1 50 µs
1 to 0 200 µs
Output data length 1 byte
Output current
Rated current per channel (max.) 0.5 A at UP 24 V DC (resistance, general
use and pilot duty)
Rated current per group (max.) 1 A
Rated current (all channels together,
max.)
1 A
Max. leakage current with signal 0 0.5 mA
Processor modules > AC500-eCo
2022/01/313ADR010278, 3, en_US70
To Next Page
Loading...
