Settings on the module State of
LEDs
Internal wiring
diagram
Description
Slave within the bus line
The arrangement of the parameter data is performed with Automation Builder software.
1. In the device tree, double-click the desired option board.
2. Select the “TA51xx Parameters” tab to edit the parameterization of the desired option
board.
Signal Color State Description
TxD Yellow ON (blinking) Transmitting
RxD Yellow ON (blinking) Receiving
120R Yellow ON Bus termination
PUD Yellow ON Pull-up / Pull-down
Parameteriza-
tion
State LEDs
Processor modules > AC500-eCo
2022/01/313ADR010278, 3, en_US88
To Next Page
Loading...
