3CALCulate Subsystem
184 N1911A/1912A P-Series Power Meters Programming Guide
Parameters
Example
Reset Condition
On reset, both channels are set to +90.00 dBm or +90 dB.
Query
CALCulate[1]|2|3|4:LIMit:UPPer[:DATA]? [MIN|MAX]
Item Description/Default Range of Values
numeric_value A numeric value for the lower test limit:
• DEF: the default is –90.00 dBm or
–90 db
• MIN: –150 dBm or –180 dB
• MAX: +230 dBm or +200 dB
–150 to +230 dBm or
–180 to +200 dB
DEF
MIN
MAX
CALC2:LIM:UPP:DATA 5 This command enters an upper limit for
the lower window/upper measurement
depending on the window’s units as
follows:
dBm = 5 dBm
W = 5 W
dB = 5 dB
% = 5 %
To Next Page
Loading...
